1, Solar panel laminator More detial
Video : https://youtu.be/z40GXEARBv4
2, Solar cell tester More detail
Video : https://youtu.be/h2ug_IRdiks
3, Solar module tester More detail
Video : https://youtu.be/bwuWdhUHSCY
4, EL tester More detail
Video : https://youtu.be/lw6NmZ4ghq8
5, Framing machine More detail
Video : https://youtu.be/bwuWdhUHSCY
6, Soldering ribbon cutter More detail
Video : https://youtu.be/5ZN_ZZEfLYs
7, EVA, TPT cutting station
Video : https://youtu.be/D3EsR66WwoE
8, EVA, TPT transfer carrier
9, Tabbing & string machine More detail
Video : https://youtu.be/cYkpdmTrQik
10, Cell string shelf
11, Laying up station More detail
Video : https://youtu.be/0lpLIX5yGQc
13, Working table
14, Ready material carrier
15, Module transfer carrier
Other apolegamy machines ( Depend on the type of solar panel and customers optional )
16, Laser scribing machine ( If produce smaller solar panel or produce half- cell solar panel ). More detail
Video : https://youtu.be/4H069kZQk9A
17, Gluing machine ( Easy to glue the junction box ). More detail
18, Aluminum cutting machine and Aluminum punching machine . ( If want to produce solar panel aluminum framer from aluminum bar ) . More detail
Video : https://youtu.be/B3VrLLYZSIU
Video : https://youtu.be/_B0GkqbbgLM
19, Air compressor . ( It is nomally compressor , But will be lower price from China ). More detail
You can Click each above equipments to check the specification detail .
This specification shall cover design, manufacture, shipping, oversea installation,oversea training and oversea after service. This solar panel production line should have a production capacity of 5 MW/year considering 80% uptime and single shift of operation.
1. General requirements of workshop: 500- 800 square meter.
Requirements in warehouse: The soldering room and EVA storehouse temperature, keep in 25 ℃.
(1) Power source: 3 phase 5 line, more than 50 KW;
(2) Water supply: little need.
(3) Air source: 100L / min compressed air;
(4) Environment: (enclosed, dust-proof, anti-skid, temperature);
(5) The main production site layout plans.
Solar panel produce program
1. Preparation: Preparation of raw materials.
2. Cutting material: EVA. TPT. soldering wire.
3. Soldering solar cell. By tabbing and string machine.
4. Laying up:Tabbing solar cell on the EVA and glass.
5. Laminating: Laminate EVA , Solar cell and back sheet also glass by the laminator..
6. Fix junction box: Trim edge of the extra EVA and fix junction box on the panel.
7. Testing: Test laminated solar panel by EL tester and solar module tester.
8. Quality tests: In the process of making other tests, IV curves of the test, and the appearance of high-voltage isolation.
9. Warehousing: Qualified storage products, goods failed to repair.
The main raw materials
① Tempered glass
② Solar cells
③ EVA film
④ TPT sheet
⑤ Junction Box
⑥ Soldering ribbon.
⑦ Aluminum alloy frame
⑧ Silicon gel
9 Soldering flux.
10 High temperature tape
We design the factory layout showing different machines for smooth production. The layout should show the all the machines including the store and office area in proposed layout plan.
We send engineer or technicians to buyer’s factory to install machine. All expenditure on travel, food, accommodation and transportation of our engineers/ technicians for installation will be borne by buyer. REOO company borne the salary of engineer/technicians.
We supply both overseas and local training to the engineers and technicians on operation and maintenance. buyer borne air tickets, lodging, food and training material .
Minimum 12 (twelve) months warranty of all products and services and guarantee for the spares and required maintenance or replacement support are to be provided . Buyer borne the cost of the material for parts of maintenance.
40% of the contract value be pay by T/T advanced.
60% before shipment.
30 days after received the advance payment.
We borne insurance of goods under contract from the time these are loaded on board the ship.
Taxes and Duties:
Buyer shall pay all taxes and duties, payable under government laws, for all goods and materials imported under the contract into any port .
All the equipment, tools, accessories and goods be suitably packed. All packages are liable to be opened for customs examination and packing shall therefore be designed to facilitate opening and repacking thereafter. Each package shall have the shipment information printed on it in bold letters.
Operational and maintenance manuals of all equipment is in English, along with a soft copy in a CD (compatible version: MS Word/ PDF).
We supply essential backup spares. items beyond warranty periods, buyer borne the cost.
We supply all the material for production solar panel from China for trial production and formal production, buyer pay for the cost.
Guarantee and after -sale service:
One year guarantee for whole machine except of consumable..
24 hours technical support by E-mail, Skype or QQ..
Calling or door-to-door service
Ues-friendly English software, user manual and detailed Video/CD.
Contact: REOO Tech
Add: Chennan industrial park, Rudong, Jiangsu, China 226400
WhatsApp: + 86 1390 1472 859
Facebook: REOO tech
Twitte: REOO solar PV